Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Thanks for your reply. I appreciate your time. Not what I has hoping to hear, but I always get good sound advise from the message board.

Replaceable Cutting Edge - 54 Bucket
Loaders Back Hoes
Replies 10 Post by Green MT Jim

I have a JD 4110 with a 54" bucket. The bucket is getting beat up due to plowing 300' + gravel drive. I want to get the Replaceable Cutting Edge from JD. However, I learned that it is only available for 61" and larger buckets. Can I get the 61" and have it cut? Also I would have to drill through the bucket. Is that an easy task?<br>
<br>
Any help would be appreciated.

Replaceable Cutting Edge - 54 Bucket
John Deere Tractors
Replies 2 Post by Green MT Jim

I'm back with a status. Unfortunately, I also had computer problems after posting the question. I drained the tank, inspected inside the tank (found nothing), blew air through the fuel line and it didn't seem to have any obstructions... Next I took a long piece of 14 gauge wire and I was able to go into the fuel tank, poke it into the top of the fuel line (1/4") and move it around. I found what appeared to be some gelling. I put a rag on a piece of pipe and wiped it up. I replaced everything, filled with fresh fuel with the JD Fuel conditioner. It has been running perfect since. I have put about 6 hours on it since.
On a side note: The opening in the bottom of the tank is less than 1/4" in diameter. Any idea why it is so small? Seems like if it was a bigger opening, this problem would be significantly reduced.
Thanks for all the help - Jim

4110 staling
John Deere Tractors
Replies 12 Post by Green MT Jim

I have the 4110 also. I have looked, but have not priced. A JD dealer told me to look up this site... http://www.firebirdfiberglass.com/I have not inquired about prices though.

JD 4110 OEM Topper Canopy Price
John Deere Tractors
Replies 4 Post by Green MT Jim